Sound insulation cabins • Splash guard cabins • Special gates • Custom-made products • Sound insulation walls • Sound insulation ceilings

PRODUCT RANGE SOUND INSULATION CABINS:

The high degree of specialization of MÖRZ is clearly evident in cases where noise and rest areas are very close together and a faster and safer access is required via special doors and gates.
MÖRZ sound insulation cabins allow an acoustically pleasant atmosphere and minimize noise pollution at the workplace. Whilst at the same time dropping below the medically specified limits.

With the modular construction system by MÖRZ individual solutions can be implemented and the highest of design standards met.

Sound insulation cabin for a 6-fold crossbar transfer press brake

With 12 electrically actuated vertical lift gates. Upper separate, insular level with access to the press drives to control when the machine is running. All the elements can be easily dismantled for maintenance works.

Place of installation: Skoda, Czech Republic

Sound insulation cabin for press brake

including downstream and upstream loading and unloading system, integrated with an internal and external stair system. Dismantleable wall sections for rapid maintenance.

Place of installation: Italy

Sound insulation cabin of a working centre

with internal automatic horizontal door to provide projection from chips in the control cabinets.

Location: Canada

Sound insulation cabin for the paper industry

Cabin with folding wing doors for complete accessibility with a minimal swing range.

Cross cutter with angle sliding hoods and maintenance doors.

Sound insulation cabin for vibration welding plant.

Featuring top insulating properties – reduction from 120 dB (A) to 80 dB(A). With very rapid, counter-running lifting gate for robotic loading – cycle times of approx. 4 seconds have been achieved here.
The cabin is assembled completely above the machine, fixed with the machine and dispatched worldwide.

Compact sound insulation cabin for transportable machine tool for manufacturing drill bits.

Sound insulation cabin of a coin stamping press

with labyrinth dual-wall structure to achieve the maximum insulating effect.

Location: Denver – USA

Sound insulation cabin for wire manufacturing

with folding doors and integrated rotating mechanism for the control cabinet.

Sound insulation cabin for tool working centre

with special equipment for laser protection.

Sound insulation cabin for a modular and transportable (fork lift) recycling system for assembly on a transport rack.

Sound insulation cabin for a recycling system

with 6-metre high, manually-actuated sliding doors.

Location: France

Sound insulation cab for nibble punching machine

with top insulating properties and structure-borne noise insulation due to office room above

Sound insulation cabin for a machine for the manufacturing of pharmaceutical films

Individual and generous accesses for maintenance. Telescopic angle sliding hoods are integrated on to the roof, which make it easy to dismantle the machine components.

Sound insulation cladding of a printing machine

with extensive building adjustments in the ceiling and wall areas.

Sound insulation cabin with telescopic angle sliding hoods (crane can be used)

Doors which can open onto each other in both directions. Achievement of the maximum possible access in any desired location without limitation of the transport area in front of this.

Sound insulation cabin for copper wire manufacturing

The system is equipped with sliding doors at the front for accessibility (can open onto each other)

Place of installation: Singapore and Germany

Sound insulation cabin for woodworking,

taking into consideration the internal dust problems.